Our probe is desined to sampling particulate matter and chemicals in stack. The heated filter box prepared by quick connection to the heated probe is avalible in order to sampling particulate matter. Outstack filterholder and probe heated in order to prevent water vapour and some volatile organic compounds condensation.
Its design allow you to combine the probe with the probe stand, to move the probe freely all direction. You can also easly move the probe to determining swirl angle in accordance with the EN16911 and US EPA M1/2 . Depends on the stack position you can fix the probe in two different positions for vertical or horizontal stacks.
All parts exposed to chimney smoke are made of stainless steel which is accepted as AISI 316 and 304. Pneumatic and electronic connections are combined in a compact single structure. The pitot tube and thermocouple are integrated into the probe body for use in more rugged and easier stacks.
HSP2
Isokinetic Heated Sampling Probe
HSP3
Isokinetic Heated Sampling ProbeOur probe is desined to sampling particulate matter and chemicals in stack. The heated filter box and filter holder was placed to back of the heated probe to sampling particulate matter. It is desined to sampling particulate matter and chemicals in stacks. Heated outstack filterholder and probe prevent water vapour and some volatile organic compounds condensation.
Its design allow you to combine the probe with the probe stand, to move the probe freely all direction. Depends on the stack position you can fix the probe in two different positions for vertical or horizontal stacks.
All parts exposed to chimney smoke are made of stainless steel which is accepted as AISI 316 and 304. Pneumatic and electronic connections are combined in a compact single structure. The pitot tube and thermocouple are integrated into the probe body for use in more rugged and easier stacks.
HSP1
VOC Sampling ProbeHSP1 probe was developed for sampling volatile organic carbon gas components from stationary sources in accordance with EN 13649 standarts with the dynamic dilution method. You can also uses this probe with FID analyzer as well which requested by EN 12619 standart.
The temperature of the probe was set to 180 degrees with the self-regulating element. With the thermoregulation version of this probe, temperature adjustment and control can be done with an external sampling device.
The probe is equipped with a total gas outlet and dilution gas inlet. Thanks to this feature, it is possible to dilute the gas taken from the source at desired rate. Due to the increase of the dew point of the diluted gas, the problem of moisture condensation on the line is eliminated.