Coolers

The cooler box is the cooling part of the HSP2 sampling probe for water condensation of stack gas water contants. It is also used for determination of micropollutants with impingers train.

You can attach the box directaly to back of the heated filter box without using any tools. The short connection between the filterholder and impingers train reduces the water condensation along the tubes. You can place up to 6 impingers in the box with the different combination to fulflill different standards.

The body of box is made of painted aluminum and isolated to keep the internal box temperature cool for long time. The box equipped with a practical quick connector for the suction tube. The mounting bracket on the side of the box supports the heavy tubes protecting the impingers from damages. The support foems also keep the impingers safe in transportation and during the sampling.

You can use this cooler to cool the impinger series in sampling train for pollutants from the stack. Its also possible to use it as cooling of micropolluntants condensation device in sampling parameters such as PCDD / PCDF and heavy metals. The design of this device allows you to use two separate functions simultaneously. .

It contains a container for water with 6 liter capacity. You can fill and empty of the bath by simple and easy oparation. Just disconnect one tube and run the pump to empty the tank.

The cooler body is made of painted aluminum and the inner water container is insulated to keep the temperature cool for a long time. The coolant is equipped with a practical quick connector for the water circulation pipe. The backing sponge keeps the impinger assemblies safe during transport and sampling. Practical handles and small dimensions facilitate the transport, handling and lifting required to reach the sampling point.