HSP2
Our probe is desined to sampling particulate matter and chemicals in stack. The heated filter box with quick connection to the heated probe is avalible in order to sampling particulate matter. Outstack filterholder and probe heated in order to prevent water vapour and some volatile organic compounds condensation.
It's design allow you to combine the probe with the probe stand, to move the probe freely all direction. You can also easly move the probe to determining swirl angle in accordance with the EN16911 and US EPA M1/2 . Depends on the stack position you can fix the probe in two different positions for vertical or horizontal stacks.
All parts exposed to chimney smoke are made of stainless steel which is accepted as AISI 316 and AISI 304. Pneumatic and electronic connections are combined in a compact single structure. The pitot tube and thermocouple are integrated into the probe body for use in more rugged and easier stacks.
Heated Probe
| Heating control | K-Type TC and ISO Smart Plus Sampler |
| Tempreature range | Programable range 50 -180 ℃ |
| Inside probe structure | - Pitot Tube inlet - Sampling inlet - Optional gas inlet - K-Type TC |
| Materials | Stainless steel |
| Available length | 0.5 to 3 meters |
Heated Box
| Heating control | K-Type TC and ISO Smart Plus Sampler |
| Tempreature range | Up to 150 -180 ℃ |
| Inside box structure | - Probe inlet - Heating element inlet - K-Type TC |
| Materials | Double painted aluminium |
Cooler & Condensing Box
| Box impinger capacity | 6 |
| Conection to heated box | Directly to back of the heated filter box |
| Cooling method | Passive - ice |
| Materials | Double painted aluminium |
Built in accordance with the main international methods such as:
| EN UNI 16911 | Determination of velocity and flowrate in ducts |
| US EPA M2 | Determination of velocity and flowrate in ducts |
| US EPA M4 | Determination of moisture contants in stack gases |
| EN ISO 13284-1 | Particulate matter in low concentrations US EPA Method 17- 5 |
| EN ISO 1948-1 | Dioxins/Furans and PCB - EN UNI 13211 Total Mercury |
| EN 14385 | Heavy Metals - US EPA Method 1-2-5 |
| EN 1911 | Determination of mass concentration of gaseous chlorides expressed as HCl |
| EN 15713 | Sampling and determination of gaseous fluoride content |
| EN 14791 | Determination of mass concentration of sulphur oxides |
| EN 13211 | Determination of concentration of Mercury |
- Modular assembling, rugged and easy to use
- Ready for swirl determination (digital inclinometer needed)
- Integrated type “S” Pitot tube
- Integrated K Type termocuple for stack gas tempereature measurenment up to 1200 0C
- Freely removing stack gas temperature sensor to calibration
- Integrated K Type termocuple for heating control of probe up to 200 0C
- Integrated seperate gas sampling line (Optional)
- Easy internal sampling line replacement by your application need. Titanıum GR2, Borosilicate glass, Quarts or AISI 304 inner tube.
- Suitable also for horizontal ducts
Heated Probe for Micropollutants Sampling:
All the elements exposed to stack fumes are are realized entirely AISI 316 stainless stell. The pnematic and electronik connections are integrated in compact singel block stracture. The pitot tube and thermocouple are integrated within the probe body, more rugged and easy to use in the stacks.
Inner Tube and calibrated Nozzles:
The HSP2 probe is designed to quickly replace the inner tube with other made of different material in order to be in compliance with diferent standarts for micropollutants,sampling along with particulate matter.
With the HSP2 it’s possibleto use internal suction tubes made in:
- AISI 316
- Borosilicate glass
- Quartz
Heated box
Heated box is seperatabel part of heated sampling prob wihich is used for housing the filter elements inside it. The sampling dust is colected in the filter holder inside the heated box.
It is made of stainless stell and aleminum with protecting painting. The insulation of the box allows it to operate of 150 -180 ℃ which is control by the ISO Smart Plus samplear.
Filter Holder
Titanium, Glass, or Quartz filter holder for 47 mm flat memberans or thimbles. The filter holder memberan is placed inside the filter holder and it is very fast and practical to change. Wight tight surface decrease the risk of filter breaking.
Termal Box for Impingers
Thermal box is conected to the back of the filter holded heated box. The impinger inside the impinger train of the thermal box connect to filter holder directly without tubing which requested by EPA methode 5 or by recent EN methodes for determination of micropollunts in flue gas emission.
Sample Distribution Center
The HSP2 probe is designed to be upgraded in relation to the application. It’s modular design allowes to add parts and devices to allow the sampling of different parameters simultaneously using only one probe.