The PM10 inlet is designed to allow only particulate matter #10 µm in diameter to remain suspended in the sample air stream as long as the flow rate of the system is maintained at 16.67 L/min.
EPA PM10 sampling head is a laboratory and field proven method for PM10 particle aspiration. This inlet is used for FRM PM10 low volume samplers. It is manufactured exactly according to US EPA Code of Federal Regulations.
The filter holder and cassette are the part of the sampling head that carefully designed particulate sampling system.
EPA 40 CFR PM 10 Sampling Head
Extensible Stand & Carrier
One of the most difficult operations in emission measurements is to move the sampling device and probe to the measurement point and mount them to the measurement point. The Expandable Stand and Carrier was designed and manufactured to make this job easy.
It is now very easy to mount the probe on this stand and set the desired height. It is also possible to fix and transport this stand on the sampling device.
A separate section is prepared for the nozzle, filter holder and other parts used in the sampling process.
Probe Holder
In order to make the holder lightwhight all parts of the probe holder is made of aleminum. Thanks to this feature of the probe holder, the user can easily mount the sampling probe into the chimney. You can also position and fix the sampling probe horizontally in the desired length of the chimney.
For determination of the swirl angle in accordance with the EN16911 and US EPA M1/2, you can easly rotate the probe in desired direction.