Smart PM
Smart PM Atmospheric Particulate Matter Sampler is an advanced sampler used to determine particulate matter of size 2.5, 10 microns and smaller concentration in atmosphere. The wide regulation range and the accurate electronic flow sampling control at either actual or standard conditions, makes Smart PM in accordance with the reference methods.
The sampler complies with the EPA 40 CFR Part 50 reference method for PM10 determination. It can also be used for PM2.5 sampling with M10 cap and 2.5 micron impactor cut separator. The sampler is also suitable for the EN 12341 method for sampling PM 10 at 2.3 m3 / h and PM 2.5 to 1 m3 / h.
DThe following data measured during sampling is stored in the internal memory. Data can also be backed up to a flash drive via the USB interface:
Sampling Flowrate
| Device | Orifice meter |
| Range | 10 ÷ 60 l/min |
| Accuracy | Better than ± 1% |
| Resolution | 0.01 l/min |
ABS, Pressure(Static or Barometric)
| Range | 0 ÷ 105 kPa (1050 mBar) |
| Accuracy | Better than 1% of measure ± 0.01 kPa |
| Resolution | 0.01 kPa (0.1 mBar) |
Ambient Temperature (PT100 Sensor)
| Range | -20 ÷ 80 °C |
| Resolution | 0.01 °C |
| Flowrate operative range | 10 ÷ 60 l/min |
| Display | 5.0” Graphic Color |
| Data Port | USB 2.0 |
| Printer Port | Bluetooth |
| Internal Memory | 16GB |
| Power supply | 220 Vac ±10% 50/60Hz |
| Materials | % 100 Aluminum |
| Keyboard | Polycarbonate, tactile effect keys |
| Dimensions | 450 x 274 x 535 mm (W x D x H) |
| Weight | 14 kg |
- PM 2.5 or pm10 Size Separator
- Precise sampling flowrate is directly controlled with a mass flow meter
- Higher quality of the data due to automated parameters control
- It can work with all sampling heads EPA or EN
- Large color screen
- A diaphragm type pump with AC motor for reliable & low noise operation
- Construction suitable for outdoor use